CSE010016902 MAMBA MICRO X2 16.8V WP ESC WITH 0808-5300KV COMBO.

Castle Creations Mamba Micro X2 1/18 Brushless ESC + 0808 5300Kv Motor Combo

Part Number: CSE010-0169-02 / 010-0169-02

Upgrade your 1/18 scale RC car or truck with the Castle Creations Mamba Micro X2 Brushless ESC and 0808-5300Kv Motor Combo. Designed for lightweight mini RC vehicles, this compact power system delivers strong brushless performance with advanced Castle tuning, data logging, CRYO-DRIVE technology, and waterproof ESC construction.

The included 0808-5300Kv sensorless brushless motor is designed for 2S–3S LiPo operation and vehicles weighing up to approximately 2 lbs ready-to-run.

Application / Compatibility

Recommended for compatible 1/18 scale RC vehicles, including:

• Losi Mini-T 2.0
• Traxxas LaTrax Rally
• Traxxas LaTrax Teton
• Axial Yeti Jr.
• Other compatible 1/18 vehicles up to approximately 2 lbs

Not intended for 1/16 or 1/14 scale vehicles such as the Traxxas Mini E-Revo or Losi Mini 8IGHT/T.

⚠️ NOT RECOMMENDED FOR ARRMA GROM

Castle specifically states that the included 0808 motor is NOT recommended for ARRMA GROM vehicles.

The GROM motor mounting system can create excessive flex that may damage the motor's 2mm output shaft. Damage caused by using the 0808 motor in an ARRMA GROM vehicle is not covered by Castle's warranty.

Features

• Mamba Micro X2 Waterproof Brushless ESC
• Castle 0808 5300Kv Sensorless Brushless Motor
• 2S–3S LiPo with Included Motor
• ESC Supports Sensored Motors
• CRYO-DRIVE Technology
• Data Logging
• Telemetry Ready
• Auxiliary Wire Functionality
• Castle Link Programmable
• B-LINK Compatible
• Waterproof ESC Design
• 3.5mm Motor Bullet Connectors

Includes

• (1) Castle Creations Mamba Micro X2 ESC
• (1) Castle 0808-5300Kv Brushless Motor

⚠️ Battery Connector – Soldering Required

BATTERY CONNECTOR IS NOT INCLUDED OR PRE-INSTALLED.

The ESC has bare battery input wires and requires installation of your preferred high-current battery connector.

SOLDERING IS REQUIRED BEFORE USE.

Castle recommends a connector rated for at least 40 amps, such as XT60, Deans Ultra Plug, or Castle 4.0mm Polarized Connectors.

ESC Specifications

• ESC Input Voltage: 2S–4S LiPo
• Maximum with Included 5300Kv Motor: 3S LiPo
• BEC: 5.5V / 7.5V
• BEC Peak Current: 2A
• Motor Connectors: 3.5mm Bullets
• Dimensions: 41.6 × 29.4 × 21.3mm
• Weight: 47g / 1.66 oz with wires
• Waterproof: Yes
• Programmable: Yes
• Data Logging: Yes
• Telemetry Capable: Yes

Motor Specifications

• Motor: Castle 0808
• Kv Rating: 5300Kv
• Motor Type: Sensorless Brushless
• Input Voltage: 2S–3S LiPo
• Length: 38mm
• Diameter: 20mm
• Shaft Diameter: 2mm
• Shaft Length: 12mm
• Motor Connectors: 3.5mm Male Bullets
• Weight: 50g / 1.8 oz

Important

Although the Mamba Micro X2 ESC itself supports up to 4S LiPo, the included 0808-5300Kv motor is limited to a maximum of 3S LiPo.

Always verify vehicle weight, motor mounting, gearing, battery voltage, connector requirements, and drivetrain compatibility before installation.

Warranty Claims

Any warranty-related issues or claims must be handled directly through Castle Creations.

Warranty eligibility, coverage, repair, or replacement is determined by Castle Creations according to their current policies.